Dee Why EV Charger Installation, Done Properly
EV chargers we fit range from a simple wallbox on a house to something more involved when a car space sits inside a unit block. The circuit gets sized and wired properly, often same or next day for the booking.
Call (02) 9073 7836 or book a free quote today.
Often Same or Next Day
EV charger bookings often land same or next day, so you are not waiting weeks to charge at home.
Lifetime Labour Guarantee
Charger installs carry our lifetime labour promise, plain and simple, no strings attached.
$50 Off Your First Service
Book your first EV charger install with us and take $50 straight off the quote.
600+ Five-Star Reviews
More than 600 Sydney homeowners have left us five-star reviews, EV installs among them.
What We Handle Under EV Charger Installation
Mounting the unit is the easy part. This job runs from the switchboard right through to the charger, and here is everything folded into it.
Dedicated circuit wiring. A circuit built just for the charger, sized to match the unit going in.
Wallbox mounting and wiring. The unit fixed and wired, garage, carport or driveway, wherever it needs to sit.
Switchboard capacity check. We confirm there is enough headroom on the board before connecting anything to it.
Isolation and safety switch. Its own dedicated safety switch, kept independent of every other circuit in the home.
Load management setup. When capacity is tight, load management gear lets the charger and every other circuit share supply without tripping anything.
Signs You Need EV Charger Installation
Not every EV owner needs the same setup. Here is what usually points to booking a proper charger install.
- Charging off a standard wall socket, and it is painfully slow.
- Running an extension cord out to the car, even now and then.
- An EV due to arrive with nowhere sorted to charge it.
- Wanting a charger that plays nicely with time-of-use electricity plans.
- Parking in a unit block with zero charging infrastructure to speak of.
- Uncertain whether the switchboard could even handle the extra draw.
EV Charger Installation in Dee Why Homes
Close to four in five homes across Dee Why sit in unit and apartment blocks, which shapes what kind of charger job we are quoting on. Fisher Road is one street where that unit-heavy mix is obvious, block after block.
A house with its own switchboard and garage is usually a straightforward job. A shared car space in a strata building is a different job altogether, since the charger often needs to tie into a shared meter room instead of a private board.
That is why we check who owns the board, and whether strata sign-off is needed, before quoting a unit-block install.
What Your EV Charger Installation Quote Depends On
What is already at the switchboard usually decides the price on an EV charger job more than anything else. Here is what gets checked first.
- How far the charger sits from the switchboard.
- Spare capacity on the board, or the upgrade needed to create it.
- Charger type and the power output you have picked.
- What the cable has to pass through: concrete, brick, or a tight cavity.
- Strata or shared meter room approval, for unit and apartment jobs.
A strata building's shared meter room can add a step most house jobs skip, since we sometimes need body corporate sign-off before running a dedicated circuit through common property.
We put it in writing before any work starts, no surprises later, and $50 comes off if it is your first job with us.
How We Work Through an EV Charger Installation Job
Straightforward installs rarely stretch past one visit, taking longer only if the board itself needs upgrading too.
- Site check. We walk the property, check the board, and settle on where the charger will mount.
- Cable route planned. The path between board and charger gets mapped out, working around whatever sits in the way.
- Charger fitted. The wallbox goes up, gets wired in, and connects to its own safety switch.
- Final checks. The full circuit gets tested, then we lodge a Certificate of Compliance once it is done.
Standards and Paperwork, Explained Simply
EV charger circuits are notifiable electrical work under AS/NZS 3000, and every stage from board to wallbox stays with a licensed electrician.
Once the install is tested, we lodge a Certificate of Compliance for the finished work. DIY electrical work is illegal in NSW, and an EV circuit is exactly the kind of job that gets flagged if it is not done properly.
For strata properties, the electrical compliance sits separately from any body corporate approval needed to install on common property.
The Difference on an EV Charger Installation Job
We size every charger circuit to the actual load, not just whatever cable happens to be on the van that day.
EV installs carry the same lifetime labour guarantee as everything else we do, and every quote stays fixed once it is written down.
The charger hardware comes with its own manufacturer cover, and any parts we supply carry a 12-month product warranty on top of that, kept separate from our labour guarantee.
Servicing Nearby Homes Too
An EV charger install often gets bundled with a switchboard upgrade, especially in older Dee Why homes where the board needs more capacity anyway. It is also a natural pair with a full residential electrician visit if you are upgrading more than one thing.
We work right across Dee Why and out to Collaroy, Beacon Hill and Cromer as well.
Call Us Today About EV Charger Installation
Ready to charge at home without the extension cord? Call (02) 9073 7836 and we will get a quote sorted, $50 off your first job.
Common questions
EV Charger Installation FAQs
A few quick answers before you get an EV charger installed.
Roughly how long does an EV charger install take?
Board permitting, most wallbox jobs wrap up in a single visit. Add time if the switchboard needs work before the charger can go in.
Does EV charger installation have to be done by a licensed electrician?
Yes. It touches the switchboard as well as the charger itself, and that combination has to go through a licensed electrician.
Does EV charger installation need to be notified to anyone in NSW?
Yes, it is notifiable electrical work, so it needs to be tested and signed off before it is connected to your switchboard.
What do I need to sort out before you turn up?
Just clear access to the switchboard and the spot you want the charger mounted, and let us know if you are in a strata building.
What does ev charger installation usually cost?
There is no set figure until we have seen the board and the cable run, since distance and existing capacity are what really move the price. We put that in writing before touching anything.
What happens if something goes wrong with the install down the track?
The install itself carries our lifetime labour guarantee, and the charger hardware carries its own manufacturer warranty on top of that.